TL 3G vöktunareining 4IN 2OUT

Contact controlled communicator, which can be used as an optional reporting device for alarm control panels, as a standalone GSM reporting device, or as a 4-zone alarm control device with arming and disarming option.

Main features:

• 3G/2G communication
• 4 configurable NO/NC inputs
• 2 NO relay outputs controllable by events and also remotely
• Combines the functions of the former GSM and GPRS Pager3 communicators
• Sends SMS with configurable message for each event to up to 10 phone numbers
• Voice call to up to 10 phone numbers, with up to 15 recordable messages of 10 seconds each
• Reporting to CMS (Central monitoring station) via IP to up to 4 IP addresses
• Compatibility with TELL receivers, as well as receivers using SIA IP DC -09 (with AES 128 encryption) protocol
• Up to 10 notification templates can be created
• Defining the priorities of reporting channels
• Configurable Contact ID event codes for each event including partition and zone options
• Output control can be customized separately for each event using different operation modes
• Arming and disarming (dry contact inputs, SMS, voice call, programming software)
• Extended service events (arming failed, low supply voltage, network connection error, etc.)

Application area:

• For implementing simple alarm tasks
• Control device
• Optional communicator for alarm control panels

Technical specification

• Transmission channel
   3G / 2G / GSM
• Frequency band
   900/2100 MHz @UMTS, 900/1800 @GSM/GPRS
• Operating temperature
   -20 ºC - +70 ºC
• Supply voltage
   12-30 VAC/DC
• Current consumption (maximum)
   500 mA @ 12 VDC
• Current consumption (nominal)
   120 mA @ 12 VDC
• Casing
   Plastic
• Terminal connector design
   Connectable
• Dimensions
   84x72x32 mm
• Weight
   200 g

Inputs

• Contact inputs
   4
• Configurable inputs (NO/NC)
   4
• Adjustable input sensitivity
   Yes

Outputs

• Relay outputs
   2
• Output control through free GSM call
   Yes
• Output control with commands through GSM voice call
   Yes
• Output control by SMS
   Yes
• Output activation on GSM fault
   Yes

Notifications

• GSM voice call
   Yes
• SMS sending
   Yes
• IP-based reporting to CMS
   Yes
• DTMF-based reporting to CMS
   Yes

Supported protocols

• SIA IP DC-09 protocol
   Yes
• SIA DC-05 (DTMF) protocol
   Yes
• TELLMon protocol
   Yes
• TEX protocol
   Yes

Programming

• Programming method
   USB / IP
• Programming software
   Yes

Users

• User phone numbers for forwarding incoming SMS messages
   1
• User phone numbers for reporting 
  10
• User phone numbers for output control
   10

Remote monitoring

• Monitoring station IP addresses
   4
• Monitoring station phone numbers
   2
• Individual reporting to monitoring station
   Yes

Other functions

• Configurable internal Contact ID event codes
   Yes
• Security password
   Yes
• Contact ID event code filtering
   Yes
• Event logs / number of stored events
   Yes / 1000
• Caller identification
   Yes
• Individual SMS sending to user phone numbers with predefinable message
   Yes
• Periodic test report
   Yes
• Alarm restriction
   Yes
• Alarm control panel function (arming/disarming, entry and exit delay)
   Yes
• Selectable 24h zones
   Yes
• Selectable confirmation request from user phone numbers
   Yes
• NTP server support
   Yes